Agent de liaison/Ultra Grip
Impossible de charger la disponibilité du service de retrait
Vous avez une surface difficile à peindre ? Notre agent adhésif Ultra Grip permet à Fusion™ d'adhérer à des surfaces généralement non peintes, comme les surfaces laquées, la mélamine, le thermoplastique ou le stratifié. Ce produit Ultra Grip à base d'eau, non toxique, rend l'impossible possible !
Moments où l'apprêt est recommandé :
Il n'y a que deux raisons pour lesquelles vous auriez besoin d'un apprêt. Pour l'adhérence, ou pour empêcher les taches et les tanins du bois de traverser le film de peinture. 1. Pour bloquer les taches et les tanins du bois/les bavures, appliquez l'apprêt Zinnser Shellac BIN. Ceci est également recommandé pour le pin noueux. Voici une vidéo à ce sujet https://youtu.be/aAvRz6gl6XE 2. Pour une adhérence supplémentaire sur des surfaces brillantes et lisses comme le Thermofoil, la mélamine, certains stratifiés et les sculptures détaillées très brillantes qui ne peuvent pas être poncées pour dépolir : Ultra Grip vous permet de peindre l'impossible, il agit comme un apprêt ultra-adhésif pour ces surfaces exceptionnelles très difficiles. Voici une vidéo à ce sujet https://youtu.be/6LBw9IWjCYE Les gens utilisent souvent une sous-couche « apprêt » pour passer d'une couleur foncée à une couleur claire. Ce n'est pas obligatoire, essayez plutôt d'utiliser une couleur de transition comme le gris Sterling ou notre transition Transition pour aider à réduire le nombre total de couches nécessaires. Voici quelques informations supplémentaires sur la transition : https://youtu.be/nPVFc7TpETs. Ces tons moyens plus clairs serviront de base de transition et faciliteront le passage aux blancs purs. Regardez : https://youtu.be/G30eIVq3yfc
Apprenez tout sur Ultra Grip dans cette vidéo
DIRECTIONS
DIRECTIONS
How do I use Ultra Grip™?
You can apply Ultra Grip™ using a brush, a roller, an applicator pad, or a sponge. No matter what you apply with, be aware that Ultra Grip™ will hold texture and that texture can show through to the final layer of Fusion Mineral Paint. To avoid this, ensure you apply Ultra Grip™ in a very thin layer. The product is milky in the bottle, but should be clear when applied. Let it dry 12-24 hours before painting for best results, but you can paint after 2 hours of application.
Check this post for more information: https://fusionmineralpaint.com/super-slick-surface-paint-anyway/
When do I use Ultra Grip™?
Ultra Grip™ can be used to make the impossible possible. Use it on surfaces that you can’t sand, such as thermofoil or some laminates, or even really detailed surfaces that are too difficult to scuff. A good way to tell if you need Ultra Grip™ is to paint a test area with just Fusion. If the paint laces or beads, you likely need Ultra Grip™.
Will it dry clear?
Yes it will! This means that if you have a piece you want to distress to show the original finish, but it is too difficult to sand, you can use Ultra Grip™ with no worries.
Is Ultra Grip™ a primer?
Ultra Grip™ is an adhesion primer, so it helps Fusion stick to slippery surfaces. It is not a transition primer, for painting over dark or bright colours. For that we recommend Sterling or another light grey. Ultra Grip™ will also not stop bleed through from tannins or rust. For that, we recommend Zinsser BIN shellac-based primer.
Read all about the most frequently asked questions on our FAQ page.
BENEFITS
BENEFITS
DID YOU KNOW ?
Ultra Grip makes painting the impossible, possible! Those super slick surfaces like melamine or thermofoil IKEA cabinets are no challenge for our Ultra Grip. It adheres easily and allows for our Fusion Mineral Paint to fuse right on top.
Ultra Grip is so strong, it can hold more texture, apply thin and sparingly.
FREQUENTLY ASKED QUESTIONS
FREQUENTLY ASKED QUESTIONS
How do I use Ultra Grip™?
You can apply Ultra Grip™ using a brush, a roller, an applicator pad, or a sponge. No matter what you apply with, be aware that Ultra Grip™ will hold texture and that texture can show through to the final layer of Fusion Mineral Paint. To avoid this, ensure you apply Ultra Grip™ in a very thin layer. The product is milky in the bottle, but should be clear when applied. Let it dry 12-24 hours before painting for best results, but you can paint after 2 hours of application.
Check this post for more information: https://fusionmineralpaint.com/super-slick-surface-paint-anyway/
When do I use Ultra Grip™?
Ultra Grip™ can be used to make the impossible possible. Use it on surfaces that you can’t sand, such as thermofoil or some laminates, or even really detailed surfaces that are too difficult to scuff. A good way to tell if you need Ultra Grip™ is to paint a test area with just Fusion. If the paint laces or beads, you likely need Ultra Grip™.
Will it dry clear?
Yes it will! This means that if you have a piece you want to distress to show the original finish, but it is too difficult to sand, you can use Ultra Grip™ with no worries.
Is Ultra Grip™ a primer?
Ultra Grip™ is an adhesion primer, so it helps Fusion stick to slippery surfaces. It is not a transition primer, for painting over dark or bright colours. For that we recommend Sterling or another light grey. Ultra Grip™ will also not stop bleed through from tannins or rust. For that, we recommend Zinsser BIN shellac-based primer.
Read all about the most frequently asked questions on our FAQ page.
GETTING STARTED
Learn how to prep your furniture, apply our paint, choose a top coat or brush for your perfect project by checking our our free getting started guides.
-
SHIPPING & RETURNS
SHIPPING & RETURN POLICIESWe strive to ship out every order within 1-2 days from ordering. Please read more about our shipping policy here:
-
PROJECT INSPIRATION
THE FUSION BLOGDiscover all the different ways Fusion Mineral Paint has been used in varying projects. Get ideas, learn techniques, and get inspired! Check out our Fusion blog right here.
