Finition pour bois à l'huile de chanvre - Sans danger pour les aliments
Impossible de charger la disponibilité du service de retrait
Cette finition pour bois à l'huile de chanvre, entièrement naturelle et sans danger pour les aliments, est très facile à appliquer et hydrate vos mains en même temps ! Elle s'applique comme de l'or liquide, comme on dit ici ! Il suffit de la verser ou de l'appliquer au pinceau et d'essuyer l'excédent avec un chiffon. Idéale sur bois récupéré ou brut. Elle ravive, nourrit et protège le bois pour un fini naturel et magnifique.
Idéal sur les surfaces en bois nu, où il assombrira et enrichira les tons naturels du bois tout en ajoutant un léger éclat, peut être poli pour un éclat plus élevé avec plusieurs couches.
L'huile contribuera également à nourrir et à protéger le bois. Plus le bois est vieux, plus il absorbera d'huile de chanvre et plus il deviendra foncé. Cet effet varie également selon le type de bois ; nous vous recommandons donc de tester sur une petite surface pour vous assurer du résultat.
La finition pour bois à l'huile de chanvre est sans danger pour les aliments et peut être utilisée sur les planches à découper, les billots de boucher et les planches à charcuterie. Elle offre également une finition exceptionnelle aux parquets.
La finition pour bois à l'huile de chanvre est différente de l'huile achetée dans les magasins d'alimentation, car elle passe par un processus spécifique qui permet à l'huile de sécher d'elle-même (sans solvants ni siccatifs chimiques ajoutés) et l'empêche de rancir.
Notre huile de chanvre, au parfum de noix concassées, est une finition écologique, produite localement, sans additifs ni conservateurs. Elle pénètre les surfaces en bois pour les protéger de l'intérieur. Elle ne laisse pas de film superficiel susceptible de s'écailler ou de se rayer.
EN SAVOIR PLUS - Consultez nos blogs sur l'huile de chanvre ici !
En raison de la nature mate de notre peinture, les couleurs plus foncées peuvent parfois se tacher avec les doigts et laisser des traces. Il suffit de nettoyer avec un chiffon humide ou d'appliquer une couche de finition comme notre finition à la cire d'abeille - Convient aux aliments (mélange naturel de cire d'abeille et d'huile de chanvre), notre cire pour meubles ou notre huile de finition et de teinture - SFO-Natural pour un effet riche et profond.
Découvrez-en plus sur l'huile de chanvre dans cette vidéo
| Outil d'application | Brosse, chiffon non pelucheux |
| Emplacement | Intérieur/Extérieur |
| Temps de recouvrement | Au besoin - si le bois semble sec, appliquez-en davantage. |
| Temps de séchage | 1 à 14 jours |
| Top Coat | Pour une durabilité accrue, utilisez de la cire, de la teinture et de l'huile de finition, de la teinture en gel ou de l'huile de tung. En cas d'excès d'huile, utilisez une couche de solvant inodore pour éliminer l'excédent avant d'appliquer la teinture en gel et le top coat. |
| Nettoyage | Solvant inodore pour surfaces. En cas de contact avec les mains, utiliser un savon doux et de l'eau. |
| Couverture | Voir l'emballage. Une petite quantité suffit, selon l'essence de bois et le degré de séchage de la surface. |
| Finition/Brillance | Mat à brillant. Chaque couche supplémentaire et chaque polissage augmentent la brillance. |
| Utilisations recommandées | Surfaces de qualité alimentaire telles que planches à découper, bois récupéré ou pièces peintes au lait. |
| Peut être appliqué à | Toutes les finitions à base d'eau ou d'huile augmentent la brillance, mais n'ajoutent pas de durabilité supplémentaire. |
| Peut être peint | Potentiellement une fois guéri. |
| Comment se préparer | Appliquer sur n'importe quelle surface ou couche de finition pour l'effet souhaité, à l'exception de la cire. |
| Temps de séchage | 14 à 30 jours |
| Entretien/Nettoyage | Nettoyants légers, car ils élimineront l’huile naturelle. |
DIRECTIONS
DIRECTIONS
HOW TO USE IT
We call this liquid gold! This all natural Hemp Oil Wood Finish is very easy to apply. Simply pour or brush it on, let it soak into the wood or paint finish and wipe away the excess with a rag.
COVERAGE
Coverage will vary taking into consideration what the oil is being applied. For example, previously oiled surfaces will require very little oil, whereas bare wood will require more.
WHAT IT WILL LOOK LIKE
It will not turn your surface green. This oil will darken and richen the wood with a soft lustre sheen. Generally the older the wood, the more it will darken it. This will vary based on the type of wood/species and the age of the wood. It is highly recommended to try a small amount on an area to find out how your project will look with this application.
Over Fusion Mineral Paint it will increase the sheen ever so slightly giving protection against dust that can show on darker colours. Over Milk Paint it is an amazing finish! Soaking into and binding with the Milk Paint to create a tough Water resistant finish.
CURE TIME
The oil will feel dry to the touch one day after the initial application, however complete drying can be several days. For example if there is too much oil initially applied, then small amounts of oil may rise over the first few days. This can be avoided by wiping the excess away with a cloth.
If used on a floor during this time it is recommended to place some cardboard pieces where there will be a lot of foot traffic. Dirty shoes should be kept off for at least two weeks.
On furniture over Fusion Mineral Paint and Milk Paint all excess must be wiped back leaving behind the thinnest layer. This will take a day to dry to the touch and 10 days to cure hard.
WHAT ELSE CAN IT BE USED FOR?
Used inside, this food-safe oil finish is perfect to use in the kitchen on wooden cutting boards, wooden utensils or stone. Also provides a wonderful finish for flooring.
Hemp Oil is great for nourishing old leather like your boots, handbag or even your wallet. Metal can also be revived with a little Hemp Oil too.
Wet sanding with Hemp Oil can really give you a buttery smooth velvety feel finish over the top of Fusion or Milk Paint. Using a soft grit sandpaper use the Oil as a lubricant to sand the finish smooth. The results are stunning.
BENEFITS
BENEFITS
- Food Safe
- No Chemicals
- No additives or preservatives
- NO VOC’s
- Biodegradable
- 100% Natural Hemp seeds
It penetrates to protect from the inside out. It fills up the spaces in between the grain of wood and dries to a hard water resistant finish. This oil does not leave a surface film that will chip or scratch… how amazing is that?
This oil is great for those that suffer from chemical sensitivities and cannot use solvent based products. The odour of this oil is much like crushed walnuts.This oil is a great environmentally friendly locally produced product with no additives or preservatives.
This is different than the oil in the health food stores only insofar as we have put the oil through a process which allows the oil to completely dry on its own, without the use of added chemicals or dryers. Our Hemp Oil will not go rancid.
FREQUENTLY ASKED QUESTIONS
FREQUENTLY ASKED QUESTIONS
What makes Fusion’s Hemp Oil different from the stuff I put on salads?
Our hemp oil is made a bit differently than what you put on your salad - this way it doesn’t go rancid, but it also won’t taste very good on your salad!
Can I use Hemp Oil over Fusion Mineral Paint?
Yes you can however we prefer to recommend the Stain & Finishing Oil instead as you can easily paint over it, Hemp Oil is difficult to paint over.
Can I use Fusion Mineral Paint over Hemp Oil?
Not right away. We recommend giving the hemp oil a couple of months to cure before trying to use Fusion over top. If the Fusion laces or beads, the oil is not ready to be painted on. There is no guarantee with this oil that you can 100% successfully paint over it.
Do I have to re-apply Hemp Oil?
It depends on your application. If you have applied the hemp oil to a raw wood surface and want to keep it in great condition, we do recommend re-applying every 6-12 months, or as the wood shows it needs it based on your needs. If you’ve put it over Fusion, you don’t have to reapply unless you want to.
Can I use Hemp Oil outside?
Definitely! Hemp oil adds water resistance to the surface it is applied on. It is great for decks, Adirondack chairs, and picnic tables! For best results, we recommend re-applying the oil at least once a year.
Is Hemp Oil food-safe?
Yes it is. However, we advise against using the hemp oil as food.
Can I use Hemp Oil on my wood floors?
Definitely. For this application, it is best if you can sand the floors down to raw wood, apply the hemp oil in excess, and let it soak in. Leave it for 12-24 hours, then wipe away the excess. If there is no excess, you may need to apply more and repeat the process until your floors are saturated.
Can Hemp Oil be used outdoors?
Yes, Hemp Oil can be used for interior and exterior purposes.
How do I revive old wood with Hemp Oil?
Liberally apply hemp oil to old, dried out wood, and let it soak in. We recommend leaving it overnight, and then removing excess in the morning. If there is no excess, you may need to repeat the process. A lot of older wood does take several applications to be reconditioned.
Check this post for more information: https://fusionmineralpaint.com/hemp-oil-feed-grain/
Read all about the most frequently asked questions on our FAQ page.
GETTING STARTED
Learn how to prep your furniture, apply our paint, choose a top coat or brush for your perfect project by checking our our free getting started guides.
-
SHIPPING & RETURNS
SHIPPING & RETURN POLICIESWe strive to ship out every order within 1-2 days from ordering. Please read more about our shipping policy here:
-
PROJECT INSPIRATION
THE FUSION BLOGDiscover all the different ways Fusion Mineral Paint has been used in varying projects. Get ideas, learn techniques, and get inspired! Check out our Fusion blog right here.
