Zu Produktinformationen springen
1 von 5

Hanföl-Holzoberfläche – lebensmittelecht

Größe
Normaler Preis €7,95 EUR
Normaler Preis Verkaufspreis €7,95 EUR
Sale Ausverkauft
inkl. MwSt. Versand wird beim Checkout berechnet

Dieses natürliche, lebensmittelechte Hanföl-Holzfinish lässt sich kinderleicht auftragen und spendet gleichzeitig Feuchtigkeit! Es lässt sich wie flüssiges Gold auftragen, wie man hier sagt! Einfach auftragen oder aufpinseln und überschüssiges Öl mit einem Lappen abwischen. Hervorragend geeignet für Altholz oder unbehandeltes Holz. Es belebt, pflegt und schützt Holz für ein schönes, natürliches Finish.

Am besten auf blanken Holzoberflächen, wo es die natürlichen Holztöne abdunkelt und intensiviert und gleichzeitig einen leichten Glanz hinzufügt. Für einen höheren Glanz kann es durch mehrere Schichten poliert werden.

Das Öl pflegt und schützt das Holz. Je älter das Holz, desto mehr Hanföl saugt es auf und desto dunkler wird es. Dieser Effekt variiert je nach Holzart. Wir empfehlen daher, die Wirkung an einer kleinen Stelle zu testen, um sicherzustellen, dass Sie mit dem Ergebnis zufrieden sind.

Hanföl-Holzfinish ist lebensmittelecht und kann für Holzschneidebretter, Hackblöcke und Wurstbretter verwendet werden. Es verleiht auch Holzböden ein wunderbares Finish.

Hanföl-Holzoberfläche unterscheidet sich von dem Öl aus dem Lebensmittelhandel, da es einem speziellen Prozess unterzogen wird, bei dem das Öl von selbst trocknet (ohne Zusatz von Lösungsmitteln oder chemischen Trocknern) und so verhindert wird, dass es ranzig wird.

Unser Hanföl duftet nach zerstoßenen Walnüssen und ist ein umweltfreundliches, lokal produziertes Finish ohne Zusatz- und Konservierungsstoffe. Hanföl-Holzfinish dringt tief in die Holzoberfläche ein und schützt sie von innen heraus. Es hinterlässt keinen Oberflächenfilm, der absplittert oder kratzt.

ERFAHREN SIE MEHR – Sehen Sie sich hier unsere Hanföl-Blogs an!

Aufgrund der Beschaffenheit unserer matten Lacke können dunklere Farben manchmal mehr Staub von Fingern aufnehmen und Flecken hinterlassen. Einfach mit einem feuchten Tuch abwaschen oder eine Deckschicht wie unser lebensmittelechtes Bienenwachs-Finish (eine Mischung aus natürlichem Bienenwachs und Hanföl), Möbelwachs oder unser Beiz- und Finishing-Öl – SFO-Natural – für einen satten Tiefeneffekt auftragen.

Erfahren Sie mehr über Hanföl in diesem Video


Bewerbungstool Pinsel, fusselfreier Lappen
Standort Innen/Außen
Überstreichzeit Bei Bedarf – wenn das Holz trocken aussieht, tragen Sie mehr auf.
Trockenzeit 1 - 14 Tage
Decklack Optional können Wachs, Beize & Finishing-Öl, Gel-Beize oder Tungöl für zusätzliche Haltbarkeit verwendet werden. Bei übermäßigem Ölauftrag entfernen Sie überschüssiges Öl mit einem geruchlosen Lösungsmittel, bevor Sie Gel-Beize und Decklack auftragen.
Aufräumen Geruchloses Lösungsmittel für Oberflächen. Bei Kontakt mit den Händen milde Seife und Wasser verwenden.
Abdeckung Siehe Behälter. Eine kleine Menge reicht aus – abhängig von der Holzart und dem Trockenheitsgrad der Oberfläche.
Finish/Glanz Matt bis hochglänzend. Jede weitere Schicht und jedes Polieren erhöht den Glanz.
Empfohlene Verwendung Lebensmittelsichere Oberflächen wie Schneidebretter, Altholz oder mit Milchfarbe bemalte Teile.
Kann angewendet werden auf Alle wasser- oder ölbasierten Lacke sorgen für mehr Glanz, tragen jedoch nicht zu einer längeren Haltbarkeit bei.
Überstreichbar Möglicherweise nach der Aushärtung.
Wie man sich vorbereitet Für den gewünschten Effekt auf jede Oberfläche oder Deckschicht auftragen (außer Wachs).
Aushärtezeit 14-30 Tage
Wartung/Reinigung Milde Reinigungsmittel, da diese das natürliche Öl entfernen.

ANWEISUNGEN

HOW TO USE IT 
We call this liquid gold! This all natural Hemp Oil Wood Finish is very easy to apply. Simply pour or brush it on, let it soak into the wood or paint finish and wipe away the excess with a rag.

COVERAGE
Coverage will vary taking into consideration what the oil is being applied. For example,  previously oiled surfaces will require very little oil, whereas bare wood will require more.

WHAT IT WILL LOOK LIKE
It will not turn your surface green. This oil will darken and richen the wood with a soft lustre sheen. Generally the older the wood, the more it will darken it. This will vary based on the type of wood/species and the age of the wood. It is highly recommended to try a small amount on an area to find out how your project will look with this application.

Over Fusion Mineral Paint it will increase the sheen ever so slightly giving protection against dust that can show on darker colours. Over Milk Paint it is an amazing finish! Soaking into and binding with the Milk Paint to create a tough Water resistant finish.

CURE TIME 
The oil will feel dry to the touch one day after the initial application, however complete drying can be several days. For example if there is too much oil initially applied, then small amounts of oil may rise over the first few days. This can be avoided by wiping the excess away with a cloth.

If used on a floor during this time it is recommended to place some cardboard pieces where there will be a lot of foot traffic. Dirty shoes should be kept off for at least two weeks.

On furniture over Fusion Mineral Paint and Milk Paint all excess must be wiped back leaving behind the thinnest layer. This will take a day to dry to the touch and 10 days to cure hard.

WHAT ELSE CAN IT BE USED FOR?
Used inside, this food-safe oil finish is perfect to use in the kitchen on wooden cutting boards, wooden utensils or stone. Also provides a wonderful finish for flooring.

Hemp Oil is great for nourishing old leather like your boots, handbag or even your wallet. Metal can also be revived with a little Hemp Oil too. 

Wet sanding with Hemp Oil can really give you a buttery smooth velvety feel finish over the top of Fusion or Milk Paint. Using a soft grit sandpaper use the Oil as a lubricant to sand the finish smooth. The results are stunning.

VORTEILE

  • Food Safe
  • No Chemicals
  • No additives or preservatives
  • NO VOC’s
  • Biodegradable
  • 100% Natural Hemp seeds

It penetrates to protect from the inside out. It fills up the spaces in between the grain of wood and dries to a hard water resistant finish. This oil does not leave a surface film that will chip or scratch… how amazing is that?

This oil is great for those that suffer from chemical sensitivities and cannot use solvent based products. The odour of this oil is much like crushed walnuts.This oil is a great environmentally friendly locally produced product with no additives or preservatives. 

This is different than the oil in the health food stores only insofar as we have put the oil through a process which allows the oil to completely dry on its own, without the use of added chemicals or dryers. Our Hemp Oil will not go rancid.

HÄUFIG GESTELLTE FRAGEN

What makes Fusion’s Hemp Oil different from the stuff I put on salads?
Our hemp oil is made a bit differently than what you put on your salad - this way it doesn’t go rancid, but it also won’t taste very good on your salad!

Can I use Hemp Oil over Fusion Mineral Paint?

Yes you can however we prefer to recommend the Stain & Finishing Oil instead as you can easily paint over it, Hemp Oil is difficult to paint over. 

Can I use Fusion Mineral Paint over Hemp Oil?
Not right away. We recommend giving the hemp oil a couple of months to cure before trying to use Fusion over top. If the Fusion laces or beads, the oil is not ready to be painted on. There is no guarantee with this oil that you can 100% successfully paint over it. 

Do I have to re-apply Hemp Oil?

It depends on your application. If you have applied the hemp oil to a raw wood surface and want to keep it in great condition, we do recommend re-applying every 6-12 months, or as the wood shows it needs it based on your needs. If you’ve put it over Fusion, you don’t have to reapply unless you want to.

Can I use Hemp Oil outside?

Definitely! Hemp oil adds water resistance to the surface it is applied on. It is great for decks, Adirondack chairs, and picnic tables! For best results, we recommend re-applying the oil at least once a year.

Is Hemp Oil food-safe?

Yes it is. However, we advise against using the hemp oil as food.

Can I use Hemp Oil on my wood floors?

Definitely. For this application, it is best if you can sand the floors down to raw wood, apply the hemp oil in excess, and let it soak in. Leave it for 12-24 hours, then wipe away the excess. If there is no excess, you may need to apply more and repeat the process until your floors are saturated.

Can Hemp Oil be used outdoors?

Yes, Hemp Oil can be used for interior and exterior purposes.

How do I revive old wood with Hemp Oil?

Liberally apply hemp oil to old, dried out wood, and let it soak in. We recommend leaving it overnight, and then removing excess in the morning. If there is no excess, you may need to repeat the process. A lot of older wood does take several applications to be reconditioned.

Check this post for more information: https://fusionmineralpaint.com/hemp-oil-feed-grain/

Read all about the most frequently asked questions on our FAQ page.

ERSTE SCHRITTE

Erfahren Sie in unseren kostenlosen Anleitungen für den Einstieg, wie Sie Ihre Möbel vorbereiten, unsere Farbe auftragen und einen Deckanstrich oder Pinsel für Ihr perfektes Projekt auswählen.

LEITFADEN HERUNTERLADEN
  • VERSAND UND RÜCKGABE

    Wir bemühen uns, jede Bestellung innerhalb von 1-2 Tagen nach der Bestellung zu versenden. Weitere Informationen zu unseren Versandbedingungen finden Sie hier:

    VERSAND- UND RÜCKGABERICHTLINIEN 
  • PROJEKTINSPIRATION

    Entdecken Sie die vielfältigen Einsatzmöglichkeiten von Fusion Mineral Paint in verschiedenen Projekten. Holen Sie sich Ideen, lernen Sie Techniken und lassen Sie sich inspirieren! Besuchen Sie unseren Fusion-Blog gleich hier .

    DER FUSION-BLOG